In general

Aqueous dispersion of titanium dioxide particles for creating ultrathin - invisible coatings to glass and glazed surfaces. The substrates treated with photoclean® Glass exhibit self-cleaning properties while under the influence of day-light  they become super hydrophilic


Indented Use

The product is suitable for:EN maxilaraki photo glass

  • Windows,
  • Car Windshield,
  • Glazed tiles
  • Curtain Walls
  • Plexiglass
  • P / V systems Panels
  • Solar Panels



(after mixing the ingredients)

  • Appearance:  Almost transparent, whitish liquid
  • Odour:          Odourless
  • Density:        approx. 1kg/lt.



On average 50 gr. per square meter(m2) depending on the porosity and the kind of the substrate.



Available in packages of 500 ml and 1000 ml as well as in larger cans upon request.

The quantities are referred to the resulting material after mixing.


Shelf life and storage

Since the product is not exposed to direct sunlight and it is stored at temperatures between 5 and 35 degrees Celsius, it can be retained in its unopened packaging for 12 months since the production date. After the opening and the mixing of the infredients, the product must be consumed within 10 to 15 days.



  • The packaging of photoclean® Glass, consists of two components. Before using pour the small vial in the larger bottle and agitate thoroughly the contents. The resulting material is now ready for use.
  • The surfaces to be treated must be clean from dust, grease and various residues. So carefully cleaning and sanding (in some cases) is recommended, while removing debris. Common or specializes cleaning products can be used, with very good rinsing with water. The surface must be dry before applying the product.
  • The material is sprayed in small quantities and spread quickly with clean, soft cloth, until fully absorbed.  We use the product the same way we use  glass cleaner, except that we apply to smaller areas each time, so that the product is not dried. Repeat this process until you cover the entire surface.
  • The surface should be allowed to dry at ambient temperature. It is good to be kept dry for at least 3 days, then the coating will be fully stabilized.
  • The product should be shaken periodically during its use.


Important note

As mentioned special care must be taken to avoid drying the material when applying on glass. The dried material leaves spots which are  very difficult to remove with mechanical means. For these reasons it is preferable the application be done in mild weather conditions.



  • The surfaces have been treated with photoclean® Glass, have the ability to purify the ambient air from a variety of pollutants and microorganisms.
  • The coatings are resistant to UV radiation (actually absorb part of it to work), so the stability of the coating is guaranteed for long periods, up to 3 years


The products of  NanoWin Ltd. are registered in the General Laboratory of the Greek State and in addition, they have undergone inspection & testing by:

    * Ministry of Infrastructure, Transport and Networks   (formerly Ministry of Enviroment,Physical Plannig and Public Works )    (By the Directories of Technical Material Testing)





More in this category: photoclean C-S »
©2011-2012 M&F Nano Ltd
This site was designed and hosted by Enterprise Software & Consulting