Product description

Aqueous polymers emulsion for the treatment of external metal and plastic surfaces in the car. The treated surfaces recover its lost shine and obtain water repellent and nonstick finish as well as UV protection.

 

Indented use

The product is suitable for:

  • Metallic painted surfaces, or not
  • Plastic parts (bumpers, aerodynamic covers, mirror covers, tires, etc.) painted, or not
  • Wheels (aluminum, steel, plastic hubcaps)

 

Application

  • The surfaces in which the product will be used must be clean from dust, grease and miscellaneous debris of polishing products containing wax. So it is recommended that thorough cleaning with water and common cleaning products must proceed, provided to rinse.
  • The surface needs to be dry before applying.
  • The material is sprayed directly from the package and it is spread with clean - absorbent cloth. The process must be repeated until the entire surface of the vehicle be covered..
  • When the product dry, forms an opaque film. Follows rubbing with a clean, soft cloth or a special tool (Polisher). When the dull film is removed, the surface presents a new natural shine and also non-stick and water repellent properties.
  • In general is recommended that the application be made in the shade.
  • The treated surfaces should be kept dry for 2 to 3 hours. Thus the product will fully stabilized.
  • It is recommended to do a small test patch prior to application (e.g. in a corner) to check the compatibility with the substrate..
  • A renewal application every 3 to 6 months or so is recommended, depending on usage and stress conditions of the vehicle

 

Consumption

500 ml of product is sufficient for 2 more ordinary cars.

 

Packaging

Available in packages of 500ml and 5lt.

 

Specifications

  • Appearance:  Milky
  • Odour:          Slight characteristic odor
  • Density:       Approx. 1,0 kg / lt.


Shelf life and storage

Since the product is not exposed to direct sunlight and it is stored at temperatures between 5 and 35 degrees Celsius, it can be retained in its unopened packaging for 12 months since the production date.

 

Remarks

  • The product does not contain any abrasive ingredients and therefore does not remove scratches and scratches from the paint.
  • The protective layer generated after processing, is resistant to sun, rain and dirt.
  • As long as protection lasts, the washing can be done only with water and a sponge without detergent. Thus prevent degratation of paint from brushes and chemicals.

dimokritos4

The products of  NanoWin Ltd. are registered in the General Laboratory of the Greek State and in addition, they have undergone inspection & testing by:

    * NCSR – “DEMOKRITOS
    * NATIONAL TECHNOLOGICAL UNIVERSITY of ATHENS NTUA
    * Ministry of Infrastructure, Transport and Networks   (formerly Ministry of Enviroment,Physical Plannig and Public Works )    (By the Directories of Technical Material Testing)

 

pyrforos2

 

green_umbrellagreen_leaf_transgreen_housegreen_recycle


More in this category: « easy moto EQ easy car GL »
©2011-2012 M&F Nano Ltd
This site was designed and hosted by Enterprise Software & Consulting