Product description

Aqueous dispersion to protect and waterproof textile and leather equipment and clothes of motorcyclist. like overalls, shoes, gloves, bags, etc.
It maintains the original appearance and texture of the surface and allows easy removal of stains from it, using a soft clean cloth, or with simple rinsing with water. The obvious benefit is that the rider remains dry. Moreover, the equipment is maintained in good condition and does not require frequent washing since cleaning can be done now with a cloth and water.

Indented use

The product is suitable for:

  • Overalls, pants, jackets, leather or textile
  • Gloves of leather or textile
  • Boots or shoes of any kind
  • Bags of all kinds

 

 

Application

 

  • The surfaces to be treated must be clean from dust, grease and various residues. So carefully cleaning is recommended, while removing residues.  The surface must be dry before applying the product
  • At first, apply a quantity of material, until the surface looks wet. The repetitive passage (optional), can be done before the first dry. In leathers should follow a uniform spreading of the material with a soft - absorbent cloth. until fully absorbed
  • It is recommended to do a small test patch prior to application (e.g. in a corner) to check the compatibility with the substrate.
  • The waterproofing and therefore the protection begins once the surface dries and stabilizes completely after 24 hours.
  • During application, the temperature should range between 5 and 40 degrees Celsius

 

Consumption

On average 150 gr. per square meter (m2) depending on the porosity and the kind of the substrate.

 

Packaging

Available in packages of 200ml and 1lt.

 

Specification

  • Appearance:             Transparent
  • Odour:                        odourless
  • Density:                        1kg/lt.

 

Shelf life and storage

Since the product is not exposed to direct sunlight and it is stored at temperatures between 5 and 35 degrees Celsius, it can be retained in its unopened packaging for 12 months since the production date.

 

Remarks

  • This product is not a detergent.
  • Due to the advanced production method (nanotechnology), the treated surfaces do not sealed. This means that do not affect the ability of the objects regarding the passage of air and allow them to breathe.
  • A renewal application every 6 to 12 months or so is recommended, depending on usage and stress conditions of the vehicle
  • The product is completely harmless to humans and the environment.

dimokritos4

The products of  NanoWin Ltd. are registered in the General Laboratory of the Greek State and in addition, they have undergone inspection & testing by:

    * NCSR – “DEMOKRITOS
    * NATIONAL TECHNOLOGICAL UNIVERSITY of ATHENS NTUA
    * Ministry of Infrastructure, Transport and Networks   (formerly Ministry of Enviroment,Physical Plannig and Public Works )    (By the Directories of Technical Material Testing)

 

pyrforos2

 

green_umbrellagreen_leaf_transgreen_housegreen_recycle

More in this category: « easy moto ext MprooF CAR »
©2011-2012 M&F Nano Ltd
This site was designed and hosted by Enterprise Software & Consulting