Product description

Aqueous dispersion of silicon compounds to protect and waterproof car textiles and leathers. like cabrio roofs, upholstery, seats, floor mats, etc.
It maintains the original appearance and texture of the surface and allows easy removal of stains from it, using a soft clean cloth, or with simple rinsing with water.. The risk damage from coffee, soft drinks, oil, food, etc. is minimized since such pollutants are not absorbed by the treated surfaces. With an absorbent cloth or paper, the stain can be removed, leaving the leather or fabric surface, intact and unchanged.


Indented use

The product is suitable for:

  • Leather seats
  • Fabric seats
  • Leather and textile upholstery
  • Door -  ceiling upholstery, etc
  • Fabric tops of vehicles





  • The surfaces to be treated must be clean from dust, grease and various residues. So carefully cleaning is recommended, while removing residues.  The surface must be dry before applying the product
  • At first, apply a quantity of material, until the surface looks wet. The repetitive passage (optional), can be done before the first dry. In leathers should follow a uniform spreading of the material with a soft - absorbent cloth. until fully absorbed
  • It is recommended to do a small test patch prior to application (e.g. in a corner) to check the compatibility with the substrate.
  • The waterproofing and therefore the protection begins once the surface dries and stabilizes completely after 24 hours.
  • During application, the temperature should range between 5 and 40 degrees Celsius



On average 150 gr. per square meter (m2) depending on the porosity and the kind of the substrate.



Available in packages of 200ml and 1lt.



  • Appearance:             Transparent
  • Odour:                          odourless
  • Density:                          1kg/lt.

Shelf life and storage

Since the product is not exposed to direct sunlight and it is stored at temperatures between 5 and 35 degrees Celsius, it can be retained in its unopened packaging for 12 months since the production date.




  • This product is not a detergent.
  • A renewal application every 6 to 12 months or so is recommended, depending on usage and stress conditions of the vehicle
  • The product is completely harmless to humans and the environment.


The products of  NanoWin Ltd. are registered in the General Laboratory of the Greek State and in addition, they have undergone inspection & testing by:

    * Ministry of Infrastructure, Transport and Networks   (formerly Ministry of Enviroment,Physical Plannig and Public Works )    (By the Directories of Technical Material Testing)





More in this category: « easy car GL easy car ext »
©2011-2012 M&F Nano Ltd
This site was designed and hosted by Enterprise Software & Consulting