Product description

Alcoholic dispersion of silicon compounds for waterproofing and protection of car exterior glass surfaces. The initial appearance of the surface is maintained, while longer water and liquid contaminants are removed in the form of droplets.
The spots of insects and stains are easily removed with no particular scrubbing and cleaners.
Furthermore, during movement of the vehicle under rainfall does not require continuous use of wipers as the water is removed with the help of wind


Intended use

The product is suitable for:

  • Windscreens (front and rear)
  • Side windows
  • Car lights
  • Glass roofs



  • The surfaces in which the product will be used must be clean from dust, grease and miscellaneous debris of polishing products containing wax. So it is recommended that thorough cleaning with water and common cleaning products must proceed, provided to rinse.
  • For optimal results and greater durability a surface preparation may be preceded with appropriate products referred to as glass polishing compounds with abrasive ingredients such as cerium oxide.
  • In any case of preparation (either with common cleaners or abrasive ingredients), the surface flushed with water and allowed to dry thoroughly.
  • In dry glass spray a small amount of material and spread with a soft clean cloth or paper. Repeat this procedure until cover the entire surface.
  • During application, the temperature should range between 5 and 40 degrees Celsius. It is also preferable during application to avoid the sunlight and strong winds.



On average 20 ml. per square meter (m2).


Available in packages of 100ml & 1 lt.



  • Appearance        Transparent
  • Odour:                 ethanol
  • Density:               0,8kg/lt

Shelf life and storage

Since the product is not exposed to direct sunlight and it is stored at temperatures between 5 and 35 degrees Celsius, it can be retained in its unopened packaging for 12 months since the production date..


  • The effectiveness of treatment is not affected by extreme weather conditions such as heat, sun, ice, etc.
  • When washing the vehicle is better to avoid the use of waxes on glasses.
  • A renewal application every 6 months or so is recommended, depending on usage and stress conditions of the vehicle.


The products of  NanoWin Ltd. are registered in the General Laboratory of the Greek State and in addition, they have undergone inspection & testing by:

    * Ministry of Infrastructure, Transport and Networks   (formerly Ministry of Enviroment,Physical Plannig and Public Works )    (By the Directories of Technical Material Testing)





More in this category: « MprooF CAR easy car T-L »
©2011-2012 M&F Nano Ltd
This site was designed and hosted by Enterprise Software & Consulting