In general

Aqueous dispersion of organosilicon compounds to coat and protect mineral building substrates. It facilitates the cleaning of the surfaces with no use of chemical detergents. Moreover it prevents the entry of moisture with the known consequences, as well as the forming of mold greenery and microorganisms.


Indented Use


The product is suitable for:

  • Stone (natural or artificial),   Marble & Granite
  • Ceramic flooring and wall tiles
  • Absorbent tiles cotto type



  • Appearance:     Almost transparent, whitish EN maxilaraki easy M-T
  • Odour:                Almost odourless
  • Density:                   1kg/lt.



On average 100 gr. per square meter(m2) depending on the porosity and the kind of the substrate.


Available in packages of 500ml and 1000ml as well as in larger cans upon request.


Shelf life and storage

Since the product is not exposed to direct sunlight and it is stored at temperatures between 5 and 35 degrees Celsius, it can be retained in its unopened packaging for 12 months since the production date.



  • The surfaces to be treated must be clean from dust, grease and various residues. So carefully cleaning and sanding (in some cases) is recommended, while removing residues. The surface must be dry before applying the product.
  • The most appropriate method of application on large surfaces is spraying with High Volume Low-Pressure equipment (HVLP). However, conventional methods such as roller, or spray  can be used. In case of polished surfaces such as  polished marble, granite etc. apply the product with a soft, absorbent  cloth. The equipment must be clean and dry without any residual material from a previous use. The final result does not differ in relation to the method of application, but in case of mechanical spray gun, there are savings on material and time, as well.
  • At first, apply a quantity of material, until the surface looks pretty wet. The product required for the second apply (optional) which could be done before the first is dried is significantly less.
  • It is recommended to do a small test patch prior to application (e.g. in a corner) to check the compatibility with the substrate.
  • During application, the temperature should range between 5 and 40 degrees Celsius.



  • After applying the product a possible change in appearance and texture of the surface will be negligible.
  • Water vapour permeability of the substrate is maintained. Thus, the potential trapped moisture is not prevented from exiting.
  • Since the coatings are resistant to UV radiation, they are guaranteed for long periods, up to 5 years or more


Tests and measurements


Water absorption and behavior of a cotto tile after 60-min immersion in water

  • Reference                           8,64 %
  • treated with easy® M-T 2,01 %


It was observed macroscopically very good contact angle of water in the treated sample. In practice this means easy removal of liquids from the surface.


The products of  NanoWin Ltd. are registered in the General Laboratory of the Greek State and in addition, they have undergone inspection & testing by:

    * Ministry of Infrastructure, Transport and Networks   (formerly Ministry of Enviroment,Physical Plannig and Public Works )    (By the Directories of Technical Material Testing)





Related Video

More in this category: easy T-B »
©2011-2012 M&F Nano Ltd
This site was designed and hosted by Enterprise Software & Consulting