In General

Alcoholic dispersion of silicon compounds for the protection, maintenance and easy cleaning of non- absorptive surfaces of the bathroom.

Surfaces treated with the easy ® bath maintain their original look and luster, while the cleaning can be done less frequently and only with the use of water. Furthermore, it prevents the penetration of moisture with

the known consequences, and the formation of mold, green mold and microorganisms

Intended Use

EN maxilaraki easy bath

The product is suitable for:

  • Glazed wall - floor tiles
  • Sanitary ( Basins – Sinks-toilets)
  • Batteries (water mixers, taps)
  • Glass surfaces
  • Non-absorbent surfaces

 

Application

The surfaces to be treated must be clean from dust, grease and various residues. So carefully cleaning is recommended. Common cleaning products can be used followed by very good rinsing. The surface must be dry before applying the product.

  • The material is sprayed directly from its packaging and it is spread with clean - absorbent cloth until it's completely absorbed. The process must be repeated at least once more.
  • The treated surfaces should remain dry for 2 to 3 hours, so that the product is fully stabilized.
  • It is recommended to do a small test patch prior to application (e.g. in a corner) to check the compatibility with the substrate.
  • During application, the temperature should range between 5 and 40 degrees Celsius.
  • Since the product contains alcohol, it is flammable and therefore the application and storage should take corresponding precautions. (Relevant details are referred at the Material Safety Data Sheet of the product).
  • A renewal application is recommended every 3 months in surfaces that are subject to harsh, everyday use.

Consumption

On average 25 ml per square meter (m2) depending on the porosity and the kind of the substrate

 

Packaging

Available in packages of 100 ml and 1 lt. as well as in larger cans upon request.

 

Specifications

  • Appearance: Transparent
  • Odour: (ethylalcohol)(alcohol)
  • Density: 0,8kg/lt.

 

Shelf life and Storage

Since the product is not exposed to direct sunlight and it is stored at temperatures between 5 and 35 degrees Celsius, it can be retained in its unopened packaging for 12 months since the production date.

 

Remarks

  • Even a few seconds after application, the surfaces become extremely hydrophobic, which means that water does not stand up to them.
  • Bacteria and pathogens in toilet areas can not cling to surfaces that have been processed and they can be removed with the use of a simple sponge and water. Even fats that are formed from the dirt and soap are removed easily without scrubbing and chemicals.
  • Especially in occupational settings (catering toilets, hotel, sharing toilets, etc.) reveal significant economic benefits by reducing the supply of cleaning products, labor, and environmental benefits by minimizing the use of chemicals.
  • The product is completely eco-friendly, harmless to humans and the environmentΑκόμα και μερικά δευτερόλεπτα μετά την εφαρμογή, οι επιφάνειες αποκτούν εξαιρετικά υδρόφοβο χαρακτήρα, κάτι που σημαίνει ότι το νερό δεν στέκεται πλέον επάνω σε αυτές.

 

dimokritos4

The products of  NanoWin Ltd. are registered in the General Laboratory of the Greek State and in addition, they have undergone inspection & testing by:

    * NCSR – “DEMOKRITOS
    * NATIONAL TECHNOLOGICAL UNIVERSITY of ATHENS NTUA
    * Ministry of Infrastructure, Transport and Networks   (formerly Ministry of Enviroment,Physical Plannig and Public Works )    (By the Directories of Technical Material Testing)

 

pyrforos2

 

green_umbrellagreen_leaf_transgreen_housegreen_recycle

Appearance Transparent

Odour: (ethylalcohol)(alcohol)

Density: 0,8kg/lt.
More in this category: « easy C-gl easy pet G »
©2011-2012 M&F Nano Ltd
This site was designed and hosted by Enterprise Software & Consulting